BLUELAB SOIL PH PROBE
BLUELAB SOIL PH PROBE
SKU:
PROBSOIL
TRUNCHEON NUTRIENT METER 100-1800PPM
world’s favorite nutrient meter! Main Features: • EC (0.2 - 3.6), CF (2 - 36), and ppm scales (TDS and 700 scale). • Super tough, high quality, and fully waterproof design. • No calibration required. • Auto sense on/off. • No external switches or adjustable buttons. • Great for stirring your nutrient tank too!
SKU:
TRUNV2
TRUNCHEON COMMERCIAL NUTRIENT METER 200-300PPM
Big jobs require a big Trucheon! The Commercial Truncheon® Nutrient Meter has been designed for hydroponic crops that require a higher than normal EC or CF requirement during their growing cycle. Main Features: • EC (0.4 - 6.0), CF (4 - 60), and ppm scales (TDS & 700 scale). • Super tough, high quality, and fully waterproof design. • No calibration required. • Auto sense on/off. • No external switches or adjustable buttons. • Great for stirring your nutrient tank too
SKU:
TRUNCOMV2
HM DIGITAL CONSUMER TDS METER (10/cs)
Main Features: • Economy model that is ideal for end-users. • Highly efficient and accurate due to its advanced microprocessor technology. • Resolution: 0-999: 1 ppm; 1000-9990: 10 ppm • Hold function saves measurements for convenient reading and recording. • Auto-off function (meter shuts off automatically after 10 minutes of non-use to conserve batteries). • Large, easy-to-read LCD screen • Factory calibrated with a 342 ppm NaCI solution and can be recalibrated with a mini screwdriver.
SKU:
TDS-EZ
HM DIGITAL POCKET SIZE TDS/TEMP METER
The TDS-4TM handheld meter is ideal for testing TDS and salt levels of freshwater aquariums and ponds. It can also be used for testing water filtration and purification systems, such as RO and DI, to know when to changes filters and membranes. Main Features: • Pocket size makes it ideal for portability and storage. • Hold Function • Auto-off Function (After 10 min.) • Factory calibrated with 342 ppm NaCl solution.
SKU:
TDS-4TM
BLUELAB PH PROBE KCL STORAGE SOL 250ML 6/CS
It is extremely important to carefully store and take care of pH probes when they are not in use. The life and performance of pH probes is reduced heavily when they are stored dry. If it dries, it dies. Bluelab’s Storage Solution is specifically designed to increase the response time and maximize the life of all Bluelab pH products.
SKU:
STSOL250B
BLUELAB PH PROBE KCL STORAGE SOL. 100ML 6 PER CASE
It is extremely important to carefully store and take care of pH probes when they are not in use. The life and performance of pH probes is reduced heavily when they are stored dry. If it dries, it dies. Bluelab’s Storage Solution is specifically designed to increase the response time and maximize the life of all Bluelab pH products.
SKU:
STSOL100B
HM DIGITAL REPLACEMENT PH SENSOR PH200
HM Digital SP-P2 Replacement Sensor for PH-200 PH Meter
SKU:
SP-P2
REFRACTOMETER BRIX 0-90%
Simple to use, easy to calibrate, hand-held refractometers. a) Measures sugar content. b) Measures freezing point of ethylene/propylene glycol in Celcius.
SKU:
RBX0090
BLUELAB TEMP PROBE FOR PH CONTROLLER ONLY
The Bluelab Temperature Probe is specifically used with the Bluelab pH Controller, Bluelab pH Controller Connect, and Bluelab Pro Controller Connect. It cannot be used or connected to any other Bluelab product.
SKU:
PROBTEMP
BLUELAB PH PROBE FOR METERS
The Bluelab pH Probe is used to measure the pH of a solution. Main Features: • Fully waterproof, submersible to 10m. • Quality BNC connection. • Non-refillable gel junction. • Easy to clean because of its bullet shaped glass bulb. • Compatible with all Bluelab meters with pH function.
SKU:
PROBPH
BATTERY LR-44 1.5 VOLT EACH
1.5 VOLT EACH
SKU:
PLR-044
BLUELAB PH PROBE SCREW TYPE STORAGE CAP
This screw type storage cap is for Bluelab pH probes.
SKU:
PHPROBECAP
PH 7.0 BUFFER 20 PACKETS OF 20ML SOLD BY THE BOX O
HI70007P is a premium quality pH 7.01 calibration solution. Each sealed sachet holds just the right amount of pH buffer solution making every sachet as fresh as the day it was packaged! Highly portable, with a small footprint and a lightweight design. Color coded label for easy identification of pH buffer values. Perfect for use with testers and portable meters!
SKU:
PH-P7
HM DIGITAL PH 80 HYDROTESTER (10/CS) PH/TEMP METER
Main Features: • Measures pH and Temperature. • One-touch automatic digital calibration. • Water resistant, sleek, and lightweight design. • Large and easy to read LCD screen display which includes a simultaneous temperature reading. • Measurement Range: 0-14 pH, and measures to 0.01 pH. • Resolution 0.1 pH. • Automatic Temperature Compensation (ATC). • Auto-off function, data-hold function, and low battery indicator. • Factory calibrated to pH 7.0, the meter can easily and quickly be re-calibrated with digital calibration to pH 4.0, 7.0, or 10.0 using the meter’s simple one-touch process.
SKU:
PH-80
BLUELAB CALIB. PH 7 SOLUTION 500 ML
Bluelab Calibration Solutions are essential for use with all Bluelab products for the calibration of pH and testing the cleanliness of EC probes.
SKU:
PH7500BL