SLS24 SMART LIGHT SWITCHER 24 LIGHTS
sLS24 SMART LIGHT SWITCHER WITH HIGH TEMP SHUT-OFF The sLS24 Smart Light Switcher is designed to operate up to 24 1000W 240V HID lights Smart High Temperature Shut-Off Automatic light rotation to prevent dark spot when high temp condition is met Nema 6-15 Receptacles (240V 15A) The sLS24 is built with only the highest quality components and will provide you with years of trouble free performance
SKU:
SLS24(9000093)
ULTRA SIMPLE CO2 CONTROLLER 0-2000PPM SINGLE ZONE
These easy to use CO2 controllers determine precisely when to activate and shut-off CO2 generators to maintain user-defined LOW and HIGH CO2 values in the grow room. Each unit can deactivate CO2 enrichment during the night cycle and perform CO2 evacuation as well.
SKU:
USCO2
TEMP-2V MULTIMODE FAN SPEED CONTROLLER W/IDLE
Main Features: • Automatically slows down or speeds up centrifugal fans to respect user selected temperature set points. • Enables the user to select the minimum fan speed (Idle Speed) between 25% and 60% of full power in 5% steps. • Enables the user to activate and/or deactivate the “Low Temperature Emergency Stop” during the day only, during the night only, or at all times. • Drives single phase 120V induction motor type fans up to 750 Watts, and its 6’ cord has a temperature sensor precise to 2°F/1°C.
SKU:
TV2
DAY/NIGHT VARIABLE FAN SPEED CONTROL W/ IDLE W/IDL
Main Features: • Automatically slows down or speeds up centrifugal fans to maintain user selected temperature setpoints (55ºF to 95ºF). • Enables the user to select the minimum fan speed (idle speed) between 25% and 60% of full power. • 6-ft temperature probe precise to 2ºF/1ºC. • Can drive 120V induction motor type fans up to 750W, 6, 2A.
SKU:
TV12
TEMP-1V DAY/NIGHT FAN SPEED CONTROLLER
Main Features: • Automatically slows down or speeds up centrifugal fans to respect user selected temperature day and night set points. • Enables a much tighter and precise temperature curve. When ON/OFF controls usually yields a variation over 5°F/3°C, TV1 will yield a variation below 2°F/1°C. • Drives single phase 120V induction motor type fans up to 750 Watts. • Comes with a 6’ cord that has a temperature sensor precise to 2°F/1°C.
SKU:
TV1
HIGH TEMP SHUT OFF TEMPSTAT
Main Features: • Automatically shuts down lighting and/or other equipment when a high temperature setpoint is reached. • Once turned-off, the unit will run a user selected delay from 0-30 minutes before turning back on or will hold restart until manual reset (temperature setback of 5° or 10° F/3° to 5°C). • Can power 120V equipment up to 15amp, and is to be used in conjunction with 120V triggered high-load or light switcher like the LS1, LS2, or LS3 (see page 157 for info on LS1/LS2/LS3). • Its 6’ cord has a temperature sensor precise to 2°F/1°C.
SKU:
TP3
24HR TIMER & HIGH TEMP SHUT-OFF
Main Features: • High Temp Shut-Off to prevent the grow room from overheating. • Temperature setpoint between 70ºF and 120ºF (21ºC to 49ºC). • ON time values: 12, 14, 16 or 18 hours. • Unit can start on OFF or ON cycle. • Internal 24-hour clock will maintain ON/OFF cycles for a minimum of 48 hours during a power outage.
SKU:
TP24H
ADJUSTABLE DIFFERENTIAL TEMPSTAT
Main Features: Temperature controller with adjustable differential Heating or cooling 55°F - 95°F (13°C - 35°C) Differential 4°F - 20°F (2°C - 11°C) Maximum 120V load : 15A (resistive, ballast), 10A (tungsten), 1/2HP (motor, pump)
SKU:
TP2
DAY/NIGHT TEMPSTAT W/ ADJUSTABLE DIFFERENTIA
Main Features: • Controls cooling or heating equipment according to a day or night setpoint (55ºF to 95ºF). • 6 foot cord with temperature sensor precise to 2ºF/1ºC. • Can power 120Vac equipment up to 15 amp. • Adjustable differential from 4ºF to 20ºF/2ºC to 11ºC.
SKU:
TP12
TEMP 1 DAY/NIGHT THERMOSTAT
Day/Night temperature controller: Heating or cooling 55°F - 95°F (13°C - 35°C) Differential ± 2°F (± 1°C) Maximum 120V load : 15A (resistive, ballast), 10A (tungsten), 1/2HP (motor, pump)
SKU:
TP1
TELEPHONE CABLE 25FT
This 6P6C Straight Wired Modular Telephone Cable is built with long term use in mind. Assembled using heavy-duty 28 AWG silver satin cable and a heavy-duty polycarbonate 6 position 6 conductor connector, this Modular Telephone Cable will be working just like new years down the road. 25 FT Six 28 AWG Copper Conductors 6 Position 6 Conductor Connector Type: RJ11/12 Straight Wired Made with Silver Satin Modular Cable Designed for voice and telephone applications
SKU:
TELC
8-SMART LIGHT SWITCHER(240V 240V PLUG ETL
Main Features: • Smart High Temperature Shut-Off • Automatic light rotation to prevent dark spot when high temp condition is met. • Nema 6-15 Receptacles (240V 15A) • Nema 5-15 Service Receptacle (120V 10A)
SKU:
SLS8
SIMPLE ONE CO2 0-5000 PPM
This easy to use CO2 controller determines precisely when to activate and shut-off CO2 generators to maintain user-defined LOW and HIGH CO2 values in the grow room. The unit can deactivate CO2 enrichment during the night cycle and perform CO2 evacuation as well. The CO2 sensor is located in the controller box.
SKU:
SCO2
CLIMATE CONTROLLER- THE SIMPLE ONE SERIES TEMP/RH/
The SCC1 is an easy-to-use alternate solution to HTC Climate Controller. Just connect your fan (dehumidifier or humidifier) and CO2 generator, then set the knobs and you’re ready! Features two built-in LVC1 (Low Voltage Relays) to control: high power HVAC Systems (A/C, Dehumidifier), Empty CO2 Tank Detection, Automatic Competing Equipment Detection, and High Temp and Low Temp Limits.
SKU:
SCC1
GROWZONE POWER SUPPLY 12V DC 1A
1x Grozone TRANSFORMER 12V FOR MONITOR
SKU:
PS
POWER CORD DETACHABLE FOR SCO2 SJT RATED
3-conductor Cord type: SJT Length: 10 feet Wire gauge: 14 AWG Color: Black
SKU:
POWERC
ON/OFF DAY/NIGHT SWITCHER 120V 15A ACTIVATED BY DA
GroZone’s OSWDN is a plug-in module and is similar to the regular OSW (shown above) with its sense cord replaced by a photocell. The on/off outputs are no longer activated by a voltage applied to the sense cord but rather by the detection of the day or night condition.
SKU:
OSWDN
ON/OFF 120 VAC SWITCHER
Main Features: • Example use #1: To be used with CO2 controller to stop exhaust fan while injecting CO2. • Example use #2: To be used with any fan control to stop fogger or humidifier when fans are activated. • Example use #3: To be used with air conditioning system to stop recirculation fans when cooling.
SKU:
OSW
FAN SPEED CONTROL FOR SCC1 (OPTIONAL)
The SCC1 is an easy-to-use alternate solution to HTC Climate Controller. Just connect your fan (dehumidifier or humidifier) and CO2 generator, then set the knobs and you’re ready! Features two built-in LVC1 (Low Voltage Relays) to control: high power HVAC Systems (A/C, Dehumidifier), Empty CO2 Tank Detection, Automatic Competing Equipment Detection, and High Temp and Low Temp Limits.
SKU:
OB2V
OB2 RELAY OUTPUT BOX FOR CONTROLLER : SCC1
The SCC1 is an easy-to-use alternate solution to HTC Climate Controller. Just connect your fan (dehumidifier or humidifier) and CO2 generator, then set the knobs and you’re ready! Features two built-in LVC1 (Low Voltage Relays) to control: high power HVAC Systems (A/C, Dehumidifier), Empty CO2 Tank Detection, Automatic Competing Equipment Detection, and High Temp and Low Temp Limits.
SKU:
OB2