FLORAFLEX 4"-6" STACKER
Allows a rockwool user to seamlessly stack a 4 in cube on top of a 6 in cube or a 6 in cube on top of a 8 in cube—blocking light and eliminating algae, all while allowing in the necessary air a plant needs to thrive.
SKU:
HGC760458
FLORAFLEX 15.5" - 18" MATRIX (1=12/BAG)
The FloraFlex® Matrix System is a patent-pending first-of-its-kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your potted plants. It can be used with pots ranging from 7.5-18 inch diameters. You will need a Matrix unit, the same size Matrix Pad (optional), and the correlating Matrix Circulator. Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Wicking Pad. There are eight slices to the pie, each section is fed the same amount, going through the maze for even distribution. The Matrix pad is a capillary mat used for wicking. The system blocks light and keeps the top of your medium moist for a more even dry down. There are holes on the side to allow bamboo sticks for stabilization. The Matrix is reusable and can sit on top of or fit into your pot, just be sure all surfaces are touching.
SKU:
HGC760517
FLORAFLEX QUICKFILL BAGS - 2 GALLON
Introducing FloraFlex® Quickfill™ an all-in-one coco system featuring the consistency of Char Coir. The Char Coir is washed 3 times with an EC ≤ 0.06 and completely biodegradable. Take the guesswork out of feeding with this premium product. These come as a compressed and the bricks expands to become a grow bag. These bags are perfectly sized to allow for the FloraFlex® Caps to fit inside the top. The 1/2 gallon bag expands to 4.5 in x 4.5 in x 4.5 in with a volume of 1/2 gal/1.6 L. The 1 gallon bag expands to 6 in x 6 in x 6 in with a volume of 1 gal/3.6 L. The 2 gallon bag expands to 8.5 in x 8.5 in x 8.5 in with a volume of 2 gal/7.95 L.
SKU:
HGC760586
FLORAFLEX 8" 2.0 FLORACAP (60CS)
The FloraFlex® FloraCap® is a patent-pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap® 2.0 was redesigned to give you a more consistent flow rate, even distribution, a slightly increased air flow and improved stabilization. Place the FloraCap® on top of your 4, 6 or 8 in rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with FloraClips. The 4 in cap features 13 flower designed louvers and the 6 and 8 in cap feature 26 flower designed louvers that delivers water, nutrients and air to the medium while blocking light. The FloraCap® strategically covers the top of the media, allowing the root zones to dry at a more consistent rate and delivering the necessary oxygen your plants need to thrive. Algae disappears, healthy roots fill the medium and blossoms multiply.
SKU:
HGC714898
FLORAFLEX 6 IN POTPRO CUBE (4.7 IN CUBE SIZE) (1=45/PACK)
The FloraFlex® PotPro™ Cube is a hydrated coco cube. This ready-to-use medium saves you space as well as labor time. Place your 6 in PotPro™ Cube into the PotPro™ Pot, hydrate with your nutrient solution and water, plant your plant, top it with a 6 in FloraCap® and you are ready to hand feed. Advance to automation by attaching (2) FloraClips to your FloraCap® and use FloraTubing to connect your plant to your Quick Disconnect Pipe System Bubbler. Now let your PotPro™ System take care of your plants.
SKU:
HGC760524
FLORAFLEX FLORACLIP 2.0 12 PACK
The FloraFlex® FloraClip 2.0 easily transforms your FloraCap® from a top-feeding unit into an automated top-feeding system. Now simply clasp the FloraClip over your 1/4 in OD tubing (instead of threading it through the opening) and clip it to your preferred location on the FloraCap®. Then sit back and let your FloraCap® do the rest! We recommend you use (2) FloraClips per FloraCap®. Dishwasher safe and reusable. BPA and lead-free plastic.
SKU:
HGC760507
FLORAFLEX FLORA PIPE FITTING 1" TEE
Compatible with regular 1” or ¾” PVC pipe. Attaches to Flora Valve with snap feature (no glue required). O-Ring included. Available in 1″ or 3/4″. O-Ring should be lubed (if not already) for easy install and prevention of leakage. 120 psi PVC
SKU:
760480
FLORAFLEX FLORA PIPE FITTING 1" ELBOW
Compatible with regular 1” or ¾” PVC pipe. Attaches to Flora Valve with snap feature (no glue required). O-Ring included. Available in 1″ or 3/4″. O-Ring should be lubed (if not already) for easy install and prevention of leakage. 120 psi PVC
SKU:
760478
FLORAFLEX FLORA PIPE FITTING 3/4" TEE
The T fitting allows you to connect multiple manifolds to your PVC line. Glue your pvc to the Flora Pipe Fitting and easily snap it into the Flora Valve. Compatible with regular 1 or 3/4 inch PVC pipe. Comes with snap on feature to attach to the Flora Valve and also includes an o-ring. O-ring should be lubed if not already for easy install and prevention of leakage.
SKU:
760476
FLORAFLEX 4" FLORACAP 2.0 (160/CS)
FLORAFLEX 4" FLORACAP 2.0 (160/CS)
SKU:
HGC760529
FLORAFLEX FLORACLIP 2.0 12 PACK
The FloraFlex® FloraClip 2.0 easily transforms your FloraCap® from a top-feeding unit into an automated top-feeding system. Now simply clasp the FloraClip over your 1/4″ OD tubing (instead of threading it through the opening) and clip it to your preferred location on the FloraCap®. Then sit back and let your FloraCap® do the rest!
SKU:
FFLEX329
FLORAFLEX OPEN FLOW BUBBLER 1" TEE
an eight outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex™ manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (t or elbow in 1” or ¾”), Flora Valve, Quick Disconnect and Open Flow Bubbler.
SKU:
FFLEX167
FLORAFLEX AIR BLEED VALVE 3/4" 6 PACK
The FloraFlex® Air Bleed Valve (3/4”) should be installed at the highest point (above manifold) on any mainline to prevent air locks. When water starts to flow, air is forced out of the Air Bleed Valve. When water hits the valve, the valve closes and water flows freely through the line. This product gives you more control over the accuracy of your feedings.⠀
SKU:
HGC760530
FLORAFLEX 6" POTPRO POT 100 PACK SOLD BY PACK ONLY
The floraflex 6 inch potpro pot was strategically designed to allow air flow through the top and bottom of the medium as well as excellent drainage. It securely holds the 6 inch floracap allowing anyone to easily transition to the new potpro system. The pot's built in stakes and webbed bottom provide a seamless transplant to an alternate medium. Place your 6 inch potpro cube into the pot, hydrate with water, plant your plant, top it with a 6 inch floracap and you are ready to hand feed. Advance to automation by attaching (2) floraclips to your floracap and use floratubing to connect your plant to your quick disconnect pipe system bubbler. Now let your potpro system take care of your plants.
SKU:
760526
FLORAFLEX 6" POTPRO CUBE (4.7") 45 PK SOLD BY PACK
The PotPro Cube is a hydrated coco cube featuring the consistency you can trust from Char Coir. This ready to use medium, saves you space as well as labor time. Take the guess work out of feeding with this premium product brought to you by industry leaders.
SKU:
HGC760524
FLORAFLEX 12.5" MATRIX PAD 12 PACK
The FloraFlex® Matrix Pad is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.
SKU:
760521
FLORAFLEX 10.5" - 12 " MATRIX 12 PACK
The FloraFlex® Matrix Pad is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.
SKU:
760515
FLORAFLEX MATRIX CIRCULATOR 3" 12 PACK
The FloraFlex® Matrix Circulator is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.
SKU:
HGC760512
FLORAFLEX 6" FLORACAP 2.0 (90/CS) DISH WASHER SAF
The FloraFlex® 6″ FloraCap® is a patent pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap® 2.0 was redesigned to give you a more consistent flow rate, even distribution, a slightly increased air flow, and improved stabilization. Place the FloraCap® on top of your 6 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with FloraClips. Each cap features 26 flower designed louvers that deliver water, nutrients, and air to the medium while blocking light. The FloraCap® strategically covers the top of the media allowing the root zones to dry at a more consistent rate and delivering the necessary oxygen your plants need to thrive. Algae disappears, healthy roots fill the medium, and blossoms multiply.
SKU:
HGC760508
FLORAFLEX QUICK DISCONNECT PIPE SYSTEM 1" TEE OPEN
an eight outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex™ manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (t or elbow in 1” or ¾”), Flora Valve, Quick Disconnect and Open Flow Bubbler.
SKU:
HGC760494