DRAMM SYPHONJECT 12/CASE
DRAMM SYPHONJECT 12/CASE
16.00 $ CAD SKU: 10-22626
AUTOFOG INCL STAINLESS STEEL NOZZLE
The Dramm Autofog is an air assisted, micro particle generator for applying chemicals in enclosed areas. Using the Ultra Low Volume principle, the Autofog creates billions of tiny particles (5μ average diameter) which completely fill the entire treatment area and evenly cover all surfaces. These particles are delivered to the plant, insect, or surface by the air current created by the Autofog's fan, ensuring even coverage throughout the greenhouse. Because of their extremely small size, these particles eliminate costly run off, unsightly residues and damaging burn.

The Dramm Autofog can treat between 12,000 and 70,000 sq ft automatically, without an operator, saving in labor costs and health risks. Simply move the Autofog to the desired location, mix your chemical, set your timers and leave. The Autofog will start automatically at the time you desire, precirculate the air, apply the chemical and shut itself off. After the appropriate REI has passed, ventilate the greenhouse and remove the machine.

The Autofog uses a surgical, oilless compressor to protect against leakage of machine oil into the treatment area. The chemical tank has a conical centerpiece in the bottom of the tank. The special design prevents the chemical, especially wettable powders, from accumulating in the center of the tank while agitation is taking place. This ensures homogeneous solution at all times. All components of the Autofog are made from corrosion resistant material, ensuring a long, reliable life. Clean up is easy and maintenance is simple.

The Dramm Autofog comes complete with Graduated Cylinder for accurate chemical measurement and nozzle calibration, compressor assembly and fogger head, and is ready to use. The manual describes its operation and the principles involved. The machine is backed by a 6 month warranty on parts and labor.

Specifications:
Standard coverage area: Up to 30,000 sq.ft.
Coverage with HAF fans: Up to 70,000 sq.ft.
Nozzle type: Air atomizing
Standard control system: 2- 24hr quartz autostart timers
Power: 240V, 60 Hz single phase
Chemical tank volume: 14 L
Chemical Output rate: 55cc/min
System rated load: 8 amp
Compressor HP: 1
Compressor type: Oilless capacitor start brushless
Compressor output rate: 4.06 CFM @ 28.5 psi
Hose & cord length: 100 ft
Dimensions: 18.25" wide
Shipping weight: 187 lbs
9,600.00 $ CAD SKU: SLVH120V
PLASTIC DISPLAY SET BLACK
PLASTIC CLEAR DISPLAY: The transparent display window is designed so that any items you place between the two transparent, flexible plastic membranes gives off a 3D "floating" effect. Perfect for exhibiting your personal or store merchandise jewelry, antiques, medal, or coin collections
PERSONAL AND PROFESSIONAL DISPLAY: Whether you are looking for a clearer solution to displaying your jewelry store wares or simply looking for a more elegant way to display your valuables at home, this floating frame display case provides a wonderful way for friends, family or customers to view your prized items
0.00 $ CAD SKU: PDRSET12
JOINT JAPAN PARTS FOR DRAMM
8.50 $ CAD SKU: 6730
DRAMM SHUTOFF BRASS VALVE 6PK
Dramm Heavy-Duty Brass Shut-Off designed to provide fingertip water control at the end of your water hose
Ergonomic, large, quarter-turn handle controls water flow- even with wet or arthritic hands
Best Shut-Off available & Assembled in USA with American & foreign components
Full water flow design with 3/4” standard hose thread
Withstands higher pressure than comparable valves.
18.75 $ CAD SKU: 60-12353
COLOR MARK RAIN WAND DISPLAY 24 WAND DISPLAY UNIT
Main Features:

• 24 ColorMark wands per display.
• Durable Brass Shut-Off.
• Comfortable foam rubber grip.
575.00 $ CAD SKU: 60015
DRAMM WATERBREAKER NOZZLE ALUMINUM A400
The original full-flow shower head nozzle. Dramm’s aluminum 400 Water Breaker provides fast, full-flow watering without damage to your plants or disturbing soil. Used and recommended daily by professional growers worldwide. Cast aluminum and hand machined with 3/4 inch brass hose threads. Invented, designed and manufactured in the U.S.A. since 1945.
15.45 $ CAD SKU: 400AL
FOG-IT NOZZLE LOW 610L 2 GPM 12/PACK
The Fogg-It Nozzle is designed for misting delicate seedlings or for raising humidity around wilting plants. This nozzle has three mist jets which create a conical spray pattern. Available in 4 different discharge rates with a 3/4 hose thread. Made in the U.S.A. from solid brass.
9.90 $ CAD SKU: 20-72507
DRAMM FOGG-IT-NOZZLE 1/2 GPM @ 40PSI
The Fogg-It Nozzle is designed for misting delicate seedlings or for raising humidity around wilting plants. This nozzle has three mist jets which create a conical spray pattern. Available in 4 different discharge rates with a 3/4 hose thread. Made in the U.S.A. from solid brass.
10.00 $ CAD SKU: 20-72505
HANDI REACH WAND 6'
Eliminates stretching and stooping of hand watering
Water hard-to-reach areas with ease
Made in USA; extruded aluminum tubing and brass couplings
Does not included head or shut-off valve
14.00 $ CAD SKU: 172-GC
HANDI REACH WAND 5'
Eliminates stretching and stooping of hand watering
Water hard-to-reach areas with ease
Made in USA; extruded aluminum tubing and brass couplings
Does not included head or shut-off valve
13.35 $ CAD SKU: 160-GC
HANDI REACH WAND 4'
Eliminates stretching and stooping of hand watering
Water hard-to-reach areas with ease
Made in USA; extruded aluminum tubing and brass couplings
Does not included head or shut-off valve
12.00 $ CAD SKU: 148-GC
HANDI REACH WAND 3'
Eliminates stretching and stooping of hand watering
Water hard-to-reach areas with ease
Made in USA; extruded aluminum tubing and brass couplings
Does not included head or shut-off valve
10.25 $ CAD SKU: 136-GC
HEAVY DUTY BRASS SHUT OFF VALVE
ALL BRASS SHUT-OFF VALVE - Made from high grade full brass material machined to form 1 solid piece, without glued, riveted, or compressed parts in the main body, preventing leaks and cracks to develop.
LARGE CONTROL KNOB FOR WATER SHUTOFF - Long ergonomic handle designed at an angle allows easy grip and smooth operation when turning. Easy water flow control with a simple quarter turn even with wet hands, eliminating the need for wrench or pliers.
HEAVY-DUTY SINGLE SHUT OFF VALVE - Solid and thick metal construction compared to other low quality brass connector or plastic shutoffs, allowing it to withstand high pressure, temperature, and frequent daily use.
STANDARD GARDEN BALL VALVE - Hose extension that can connect directly to any GHT hose sprayer or washer, best for providing water control right at your fingertips.
MAXIMIZED WATER FLOW - 1/2 inch diameter brass chromed ball valve that won't restrict water flow unlike other hose extension with only 1/4" to 3/8" opening, designed to provide high flow operation from an outdoor faucet to any compatible hose nozzle attachment.
21.50 $ CAD SKU: 12353
DRAMM WAND 30" CLASSIC UNCARDED
Dramm Classic Rain Wand Carded 30in This wand efficiently saves water while watering plants, flowers, and shrubbery
The wand is equipped with a one-touch lever activated valve
Simply squeeze the lever to water and release the lever to stop watering while moving from one plant to the next
Rain wand with shutoff features new comfort rubber grip
Made of unbreakable cycolac plastic, drawn aluminum and brass
Large easy to use shut off valve
Lifetime guarantee
Measures 30-inch length
15.00 $ CAD SKU: 12345
DRAMMATIC "O" FISH FERTILZER 5GAL BOX (2x2.5GAL)
Drammatic o Fish 5 GaL
104.00 $ CAD SKU: 10-24250
QUICK DISCONNECT W/WATER STOP INCLUDES 1 X FEMALE
To upgrade your brew system, and make your life easier, thread these QD’s on your kettle, mash-tun, pump and chiller! When used with the male QD, they seal up very well in either flow direction. They will save you time and prevent messes. Just get several silicone hoses of various lengths and put barbed male fittings on either end. Then use them wherever you need to in your system! They are so much easier to use than pushing and pulling the hoses off of barbs. It makes things interchangeable for cleaning, and provides quick installation and removal.

MoreBeer! designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
14.00 $ CAD SKU: 10-22728